Skip to content
Electrical & Electronics EP20 Epoxy Systems Collection
EpoxyPro EP20 Series: Electrical & Electronics Potting & Encapsulation Resins
Protect delicate circuitry, high-voltage transformers, power supplies, and field electronics with the EpoxyPro EP20 Series. Engineered for maximum dielectric strength, thermal conductivity, chemical resistance, and mechanical shock absorption, these professional-grade 2:1 and 3:1 potting epoxies deliver long-term insulation across trade, industrial, automotive, marine, and defence applications.
Whether you require display-grade optical clarity, UL94 flame retardancy, low-viscosity micro-filling, novolac chemical resistance, or a wet-area repair compound, the EP20 range provides a targeted formulation engineered for electrical reliability.
Quick Reference: EP20 Electrical Potting Selector
| Formula | Specialty Focus | Mix & Viscosity | Key Performance Highlights |
|---|---|---|---|
| EP2010 | Visible PCB & High Clarity |
2 : 1 ~8,867 cP |
Crystal-clear finish, 24 kV/mm dielectric strength, 150°C thermal endurance. |
| EP2015 | Precision & Microelectronics |
2 : 1 ~807 cP |
Low-viscosity flow, UL94 V-1 tested flame retardancy, fine gap penetration. |
| EP2020 | Transformers & Power Supplies |
2 : 1 ~13,667 cP |
Thick amber formulation, 60–80 min pot life, low-exotherm deep section casting. |
| EP2025 | Chemical & PLS Resistant |
3 : 1 ~1,800 cP |
Epoxy phenol novolac technology, acid/alkali/solvent barrier for industrial plants. |
| EP2030 | Tactical Army Green |
2 : 1 ~807 cP |
Raw Umber / Army Green opaque finish, high vibration resistance, field equipment. |
| EP2040 | Wet Area Repair & Waterproofing |
2 : 1 ~6,000–8,000 cP |
Bonds to damp concrete, metal & plastics, non-sag high build for cable entries. |
System Breakdown
EP2010 (Clear Mid-Viscosity): Ideal for visible electronics, clear sensor heads, LED modules, and display-grade PCBs requiring high optical clarity and continuous 150°C thermal protection.
EP2015 (Low-Viscosity Precision): Ultra-fluid formulation engineered for fine microelectronics, cable joint potting, and tight junction boxes. Tested to UL94 V-1 flame-retardant standards.
EP2020 (High-Build Structural): Heavy-duty amber epoxy featuring an extended pot life (60–80 mins) for bulk encapsulation of transformers, high-voltage coils, and industrial switchgear.
EP2025 (Chemical & PLS Resistant): Built with epoxy phenol novolac chemistry for potting electrical components exposed to harsh acids, alkalis, solvents, and industrial process liquids.
EP2030 (Tactical Army Green): Opaque Raw Umber / Army Green tactical finish designed for field-deployed electronics, automotive telemetry, and heavy equipment exposed to severe vibration.
EP2040 (Wet Area Electrical Repair): Moisture-tolerant repair compound formulated to bond directly to damp substrates, waterproof cable glands, and seal leaking junction boxes in high-humidity sites.
Key Features of the EP20 Electrical Range
- Superior Dielectric Strength: High arc and tracking resistance to prevent electrical short circuits under high-voltage loads.
- Environmental & Thermal Sealing: Seals out moisture ingress, dust, continuous vibration, fuel spills, and severe thermal shock.
- Substrate Versatility: Strong adhesion across copper, metals, rigid plastics, GRP, glass, and circuit board substrates.
- Commercial Trade Packaging: Available in job-ready bottle sets, 30L & 60L trade packs, and commercial bulk supply.
Need trade advice or fast Brisbane Click & Collect? Contact the Resin Shop technical team today on 1300 31 31 71 or order online for fast Australia-wide freight.
