Skip to content
EpoxyPro EP70 Swimming Pool & Spa Epoxy Systems Collection
EpoxyPro EP70 Series: Swimming Pool & Spa Epoxy Coating Systems
The EpoxyPro EP70 Series is a specialized family of high-performance 2:1 epoxy resin systems engineered specifically for continuous immersion in swimming pools, hydrotherapy spas, water features, and commercial aquatic facilities. Formulated to withstand aggressive pool sanitizing chemicals, salt chlorination, algaecides, and continuous water exposure, the EP70 platform provides long-lasting waterproofing and structural protection.
Whether you require a fluid self-levelling flow coat to seal concrete render and fibreglass shells (EP7010), a high-build vertical coating for pool walls and waterline tiles (EP7020), or a heavy non-sag structural paste for skimmer box bonding and step rebuilding (EP7030), the EP70 range covers every stage of aquatic restoration.
Quick Reference: EP70 Pool & Spa Formula Selector
| Formula | Specialty Focus | Mix & Viscosity | Primary Uses & Surface Orientation |
|---|---|---|---|
| EP7010 | Low Viscosity Flow Coat & Sealer |
2 : 1 Low (~800 cP) |
Self-levelling clear glaze, pool interior sealing, fibreglass shell refresh, micro-crack penetration. |
| EP7020 | High-Build Vertical Protective Coat |
2 : 1 Mid-High (~8,800 cP) |
Minimal sag on vertical pool walls, waterline tile sealing, spa bench seating, heavy protective barrier. |
| EP7030 | High-Viscosity Structural Repair Paste |
2 : 1 Heavy Paste (~15k–25k cP) |
Non-sag repair mortar, step & edge rebuilding, skimmer box anchoring, underwater tile re-pointing. |
System Breakdown: Which EP70 Formula Do You Need?
EP7010 (Low Viscosity Flow Coat ~800 cP): Formulated for maximum fluid spreadability and self-levelling clarity. Ideal for rolling out across pool floors, sealing porous concrete render, or applying a smooth, pinhole-free protective glazed topcoat over worn fibreglass gelcoats.
EP7020 (High-Build Protective ~8,800 cP): Engineered with increased film body to cling to vertical pool walls, skimmer surrounds, and spa steps without running down to the floor. Provides a thick, chemical-resistant barrier over pitted or uneven masonry render.
EP7030 (Heavy Structural Paste ~15,000–25,000 cP): Designed specifically for load-bearing and overhead repairs. Its heavy non-sag paste consistency allows pool contractors to rebuild damaged concrete steps, anchor skimmer boxes, and seal underwater tile joints without slump.
Key Features of the EP70 Aquatic Range
- Continuous Immersion Resistance: Formulated to withstand constant submersion in salt chlorination, bromine, chlorine, algaecides, and acid washing.
- Multi-Substrate Adhesion: Tenacious bond strength to concrete render, existing epoxy pool coatings, fibreglass, ceramic tiles, and PVC pool fittings.
- Hygienic Non-Porous Finish: Prevents algae, bacteria, and mineral staining from embedding into porous pool render.
- Anti-Slip Compatibility: Easily combined with barefoot-friendly polymer grit or crushed glass aggregates on steps, ledges, and entry ramps for swimmer safety.
Need advice on pool surface preparation or fast Brisbane Click & Collect? Contact the Resin Shop specialist technical team on 1300 31 31 71 or order online for fast Australia-wide dispatch.
