Skip to content
EpoxyPro EP6030 – Heavy-Duty Structural Epoxy
EpoxyPro EP6030 is a heavy-duty 100:50 epoxy resin system designed for demanding bonding, sealing, and rebuild work.
It delivers exceptional adhesion, chemical resistance, and long-term mechanical strength across a wide range of materials. With a longer pot life and durable, water-resistant cure, EP6030 is ideal for construction, marine, and industrial applications were performance and reliability matter most.
Features
High-strength bonding – excellent adhesion to concrete, timber, metals, composites, and stone.
Durable structural performance – resists impact, vibration, and thermal stress without cracking.
Chemical and moisture resistant – provides long-term protection in harsh and wet environments.
Extended pot life – approximately 60–80 minutes at 25 °C, allowing time to position, clamp, or coat larger areas.
Excellent surface wet-out – medium to high viscosity formulation that wets fillers and fibres effectively.
Typical Applications
Structural bonding and laminating of timber, metals, composites, and stone.
Concrete repair, patching, grouting, and anchoring of fixtures or bolts.
Marine and industrial maintenance, including hull repairs, tanks, and rebuilds.
Casting, sealing, or potting where a slow, controlled cure and high mechanical strength are required.
Mixing & Cure
Mix ratio: 2 parts A (Resin): 1 parts B (Hardener) by weight.
Pot life: ~60–80 minutes @ 25 °C (100 g mass).
Cure time: Touch-dry ≈ 18–24 h · Handle ≈ 24–48 h · Full cure ≈ 72 h @ 25 °C.
Finish: Clear-to-amber, hard, and high-gloss surface.
Recommended Surfaces
Concrete | Timber | Metals | Fibreglass | Carbon fibre | Stone | Composite laminates
Ensure surfaces are clean, dry, and abraded for the best adhesion.
