Plus Rust Converter & Primer – Heavy-Duty Corrosion Protection

Stops Rust. Seals Surfaces. Primes in One Step.

Plus Rust Converter & Primer is a fast-drying, industrial-grade solution designed to neutralise rust and prepare metal surfaces for painting or long-term protection. Perfect for steel, iron, and oxidised non-ferrous metals, it converts rust into a stable, sealed surface—saving time, effort, and equipment.

Key Features:

• Industrial strength rust converter and primer in one
• Rapid drying – touch dry in approx. 1 hour (low humidity)
• Bonds to rusted and clean metal surfaces
• Seals and primes for long-lasting corrosion resistance
• Cleans oxidation from non-ferrous metals
• Unlimited shelf life when stored in sealed original container

Ideal For:

• Machinery and equipment maintenance
• Metal railings, gates, and structural steel
• Automotive parts and underbodies
• Trailers, boats, and marine fittings
• DIY repairs and preventative maintenance

Whether you're tackling surface rust or prepping metal for a topcoat, Plus Rust Converter & Primer delivers reliable, professional results—fast.

Product Coverage: 

• Litre of PLUS RUST CONVERTER & PRIMER will treat/cover approximately 25 square metres.

Directions For Use:

• Remove loose scale, dirt, oil, or grease, but leave surface film of firm rust for the RUST CONVERTER to react with.
• Apply sufficient RUST CONVERTER so that rust does not reappear
• Allow to dry completely (approx. 60 minutes) before applying oil-based undercoat.
• On bare metal that has never been painted: Do NOT wash down with water. Apply product directly to metal surface.  When dry, a harmless white powder may appear. Brush off before sealing the chemically primed surface with oil-based undercoat.
• On painted or previously painted metal surfaces: RUST CONVERTER will only dry when in contact with a rusted area. When the rusted area being treated is completely dry, flush of the surface with water or wipe over with a wet rag to remove any uncured product. For surfaces like wrought iron where "flash rusting" more prevalent, methylated spirits can be used.
• On corrugated, galvanised iron, or zinc-aluminium alloy or similar surfaces, (unpainted or previously painted): RUST CONVERTER will not effectively dry out. To remove uncured product and contaminants, flush the surface with water (HIGH PRESSURE SYSTEM) or wash area with a hose and broom. For touch up areas, wipe over with a wet rag.  To etch zinc coatings, wash down with water after 5 minutes and let dry. Apply by brushing, rolling, dipping, spraying (not pressure spray) or mopping.

Special Notes:

• This product will bleach paint, powder coated or other surfaces if allowed to run on to existing paint work. Etching of glass surfaces may also occur.
• Avoid allowing the product to run or collect into pockets of concentrated material. If they appear remove immediately with a cloth dampened with a 5% of product.
• Do not use on coloured grout or concrete with oxide colourant.
• Not suitable for use on marble or natural stone